Zenith ZW6500R Owner's Manual download pdf (Page 12)

Installation

Clearance

Proper clearance enhances the cooling efficiency of the unit and prevents heat

radiation of the condenser.

1. If a storm window presents interference, fasten a 2" wide wood strip to the inner

window sill across the full width of the sill. The wood strip should be thick

enough to raise the height of the window sill so that the unit can be installed

without interference by the storm window frame.

2. See Figure. B. The top of the wood strip should be approximately 3/4"higher

than the storm window frame (Storm Window Frame) or wood strip (Outdoors)

to help condensation to drain properly to the outside.

3. Install a second wood strip (approximately 6" long by 11/2"wide and same

thickness as first strip) in the center of the sill flush against the back off the

inner sill. This will raise the L bracket as shown Figure. B.

4. If the distance between Storm Window Frame and Wood Strip Mounted on Top

of Inner Sill is more than 1", two of wood strips are not necessary.

Inner Sill

In IU Outdoors

Wood Strip Mounted 1" Max.

on Top of Inner Sill BP"I I_'_ ^, 3/4"

"_ ulearance

-_ Storm

J_ I #v _ Window

Indoors I IU Outdoors

Figure. A Figure. B

12 Room Air Conditioner

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 46 47

No comments

Zenith ZW6500R Owner's Manual Page 12