Zenith P42W24B Operations Instructions download pdf (Page 30)

Troubleshooting Checklist

No output from one of

the speakers

• Adjust BALANCE in the SOUND menu. (Refer to p.15)

Unusual sound from

inside the monitor

• A change in ambient humidity or temperature may result in an unusual noise

at the time of switching off or on of the monitor and does not indicate a fault

with the monitor.

No picture &

No sound

• Check whether the Monitor is turned on.

• Power cord inserted into wall outlet?

• Test the wall power outlet, plug other product’s power cord into the wall outlet

where the Monitor’s power cord was plugged in.

No or Poor color

or Poor picture

• Select COLOR in the PICTURE menu and press the VOLUME (G) button.

(Refer to p.14)

• Keep a certain distance between the Monitor and the VCR.

• Activate any function to restore the brightness of the picture.

(If still picture is on the screen for more than 5 minutes, the screen gets dark.)

The remote control

doesn’t work

• Check to see if there is any object between the Plasma Display and the

remote control causing obstruction.

• Are batteries installed with correct polarity (+ to +, - to -)?

(Refer to p.11)

• Install new batteries. (Refer to p.11)

Picture OK &

No sound

• Press the VOLUME (G) button.

• Sound muted? Press MUTE button.

Picture appears slowly,

after switching on

• This is normal as the image is muted during the startup process of the moni-

tor. Please contact your service centre,if the picture has not appeared after

five minutes.

Horizontal/vertical bars

or picture shaking

• Check for local interference such as an electrical appliance or power tool.

1 2 ... 25 26 27 28 29 30 31 32

No comments

Zenith P42W24B Operations Instructions Page 30